home

  products

  about us

  support

  contact us

  download

  job opps

Application Samples
  1. Application program example for CAM Programming -- using on-board real-time computation.
  2. Application program example for Cubic Spline for simple on-board point computations.
  3. Application program example for Cubic Spline for an on-board computed user defined trajectory.
  4. Application program example for Cubic Spline for host based (C based) point transmissions.
  5. Application program example for Rotary Axis Tangent to the main path.
  6. Application program example for Blending Segment Moves.
  7. Application program example for Generating an Interrupt and turning outputs on at a position.
  8. Application program example for Various Coordianted Moves.
  9. Application program example for Linear and Circular Moves.
  10. Application program example for Using Motion Complete Interrupt.
  11. Application program example for Homing single or multiple axes.
  12. Application program example for Time-based coordinated motion.
  13. Application program example for Moves in polar coordinate.
  14. Moves generated by the DSPL Move Command Set.
  15. Moves generated by the G-code Move Command Set.
  16. Partial list of G-code Command Set including M codes.
  17. Combining G-code and DSPL in NC Executive Programming Environment.
  18. A few G-code Program Examples.
  19. A program example for Executing DSPL Compiler and Downloader within User C Program.